product manual: The reciprocating oscillator air bath thermostatic oscillator is the main product produced by our factory. The reciprocating oscillating instrument produced by our factory is also called the water bath constant temperature shaker. According to the function, there are reciprocating type, revolving type, double function type, normal temperature type, low temperature type, high temperature type, etc. The reciprocating oscillating instrument has stainless steel universal fixture. Digital display temperature control, stepless speed regulation and good thermal cycle function. It is a multi-purpose biochemical instrument, which is made by plant, biology, microbiology, genetics, virus, environmental protection, medicine and other scientific research, education and production departments. Indispensable laboratory equipment. Use range: It is mainly applied to the shaking culture of various liquid and solid compounds such as biology, biochemistry, cells and bacteria in scientific research departments such as major universities and colleges, oil chemical industry, health and epidemic prevention, and environmental monitoring. The reciprocating oscillator has the characteristics of reasonable structure, simple operation and high stability, and is an ideal equipment for laboratory staff. Please read this manual carefully before use. The working plane of the machine should not be excessively smooth (eg tiles, etc.). The electrical rating of the socket provided by the user shall not be less than the electrical rating of the machine and have good grounding measures. The whole machine is strictly prohibited from being used in direct sunlight. The speed should start slowly from low speed to high speed. The machine may have a certain shift when it oscillates at high speed, so it should be taken care of when using it. Load the test bottle and keep it balanced. If it is a dual-function model, set the oscillation mode. (Detailed settings see the last illustration) Digital display Turn on the power and set the timing according to the surface scale of the machine. If you need to work for a long time, set the timer to the “normally open†position. Turn on the power switch and set the constant temperature: Set the control small switch to the “Settings†section. At this time, the temperature displayed on the display is the set temperature. Adjust the knob and set it to the temperature you need to work. (The operating temperature you set should be higher than the ambient temperature. At this point, the machine starts to heat up, the yellow indicator light is on, otherwise the machine does not work) Put the small switch of the control part on the “measurement†end. At this time, the temperature displayed on the display screen is the actual temperature of the air in the test chamber. As the temperature inside the box changes, the displayed number will change accordingly. When heated to the temperature you need, the heating will stop automatically and the green indicator light will be on; when the heat in the test chamber is dissipated below the temperature you set, a new round of heating will start again. Turn on the oscillating device: Turn on the oscillation switch on the control panel and the indicator will light. Adjust the oscillation speed knob to the desired oscillation frequency. After the work is finished, turn off the power and set the speed control knob and temperature control knob to the lowest point. Clean the machine and keep it clean. The appliance should be placed on a firm work surface and the environment should be clean and tidy. User-supplied power outlets should have good grounding. It is strictly forbidden to move the machine during normal work. Objects are strictly prohibited from hitting the machine. Children are strictly prohibited from accessing the machine to prevent accidents. Make sure the power is off before replacing the fuse. Please clean the machine after use, and do not leave any water droplets or dirt.
Perfectly suited for smaller spaces like studio apartments and kids' bedrooms, our Computer Table can quite easily be tucked into a corner. Crafted from laminated manufactured wood and particle board, is triangular frame size and is finished with a neutral walnut tone. Though small in size, this piece offers some storage space with an open lower shelf spanning the base. Manufacturer provides a one-year warranty for this product. Assembly is required.
Our computer tables are designed to give you plenty of leg room but also doesn't take up too much space in your home.
Computer Desk,Corner Computer Desk,Small Computer Desk,Compact Computer Desk FuJian YuanFu Import&Export Trading Co., Ltd. , https://www.fjyffurnitures.com