High temperature test procedure - high temperature test chamber GB/T13543-1992 standard Pretreatment: Place the test sample under normal test atmospheric conditions until temperature stability is reached. Initial testing: Prior to any environmental testing, the test sample shall be subjected to electrical, mechanical, and other performance measurements and visual inspections under normal atmospheric conditions of the test, and test data shall be recorded. Test: The test sample is placed in the low temperature test chamber as required, and then cooled to the lowest working ambient temperature of the test sample and remains unchanged until the temperature is stable. Then start the work until the test sample reaches the temperature stability or the working time specified by the product standard (or technical documents), and carry out the intermediate test. The test items and requirements are specified by the product standard (or technical documents). Recovery: The test sample is stopped and returned to normal test atmospheric conditions in the test chamber at a rate of temperature change not exceeding 10 ° C / min until the temperature of the test sample is stable. Final test: After the recovery period is over, the test sample shall be measured and visually inspected for electrical, mechanical and other properties as specified in the equipment product standard (or technical documentation) and compared with the initial test data. The above is the high temperature test box GB/T13543-1992 standard high temperature working test program. Microfiber Towels for Car Detailing
Microfiber towels contain more than 200,000 fibers per inch of fabric and can absorb more than seven times their weight in water, making them much more effective than traditional cleaning cloths, etc.
Because they absorb more liquid and dirt than typical cleaning cloths, they also give you a streak-free clean.
Microfiber Towel, Car Drying Towel, Microfiber Towels For Cars, Car Wash Towels SGCB COMPANY LIMITED , https://www.sgcbautocare.com
