[ Chinese wardrobe net ] The length of the overall wardrobe life depends on its own quality, on the other hand, it is inseparable from the daily maintenance and cleaning of the user. After many users purchase and install the whole wardrobe , they are not well maintained. The service life of the whole wardrobe will not last long. So how do you maintain the wardrobe in the end, what is the reason for the shortened service life of the wardrobe? 1, moisture - wardrobe stealth killer For rooms with windows, it is best to pull the curtains before going out to prevent dust from invading and to block the hot sun and avoid deformation of the wardrobe. Most of the custom-made wardrobes use particleboard. Although the plates are treated with certain treatment and fine edge sealing, if they are exposed to the sun from time to time, even the heat-resistant custom furniture can resist the direct sunlight. Many housewives complain that the furniture in the house is often cleaned. In fact, it is probably because the housewives have no habit of closing the windows, pulling the curtains out, or the habit of closing the doors. Opening the wardrobe may be that the housewives may remember to close the door to avoid bumps; while the sliding door wardrobe, because it does not occupy the space at home, the function of closing the door is to want to ventilate or want dust. 2, curtains - wardrobe maintenance helper Nowadays, most consumers are willing to choose custom wardrobes because of their materials, after compression and edge sealing, the original fragile wood panels have the toughness and can pass the test of time; unlike the finished furniture that was popular many years ago, most of them use medium fiber. After the board is used for a period of time, the drawer is difficult to push and pull, and the sliding door is also deformed. Most of the custom furniture uses particle board. In the process of production, the adhesive is changed into a green waterproof and environmentally friendly adhesive, which overcomes the shortcomings of the particle board and also has good water resistance, so that the furniture has good moisture resistance. Even with such wooden furniture, remember not to wipe with water during maintenance; nor keep the wardrobe in a very humid environment. Woody things, although treated, have improved performance and increased bearing capacity; however, wood long-term water inevitably will be damp, resulting in the expansion of wood. 3, balance bearing - wardrobe long time Although it is a custom closet, it can't be asked what kind of index can be achieved by the load-bearing capacity of each partition. If you place too many items on the partition of the wardrobe for a long time, such as books. If you let the wardrobe fit for a long time, then the solid Wooden Wardrobe will be overwhelmed. In the long run, not only the partition may be damaged, but even the door of the closet may be slightly deformed. When housewives store clothes, they can combine the clothes of spring, summer, autumn and winter to reduce the weight of a certain layer of partitions to prevent deformation of the wardrobe and cabinet doors. 4, daily cleaning and maintenance - wardrobe bright and fresh Always keep the door clean and there should be no debris or dust in the track. Let the wardrobe be ventilated or use dehumidifying agents regularly to prevent the cabinet and clothes from being exposed to moisture. Use less aromatic fragrances to deodorize the wardrobe, as they are likely to cause damage to the fabric. A wooden box is a container made of wood for storage or as a shipping container. Wood Box,Solid Wood Box,Wood Gift Box,Custom Wooden Box,Unfinished Wood Box,Wood Storage Box Jinan Tri-Tiger Technology Development Co., Ltd , https://www.tritigerwooden.com
Construction may include several types of wood; lumber (timber), plywood, engineered woods, etc. For some purposes, decorative woods are used.
Boxes and crates are not the same. If the sheathing of the container (plywood, lumber, etc.) can be removed, and a framed structure will remain standing, the container would likely be termed a crate. If removal of the sheathing resulted in there being no way of fastening the lumber around the edges of the container, the container would likely be termed a wooden box.
The strength of a wooden box is rated based on the weight it can carry before the cap (top, ends, and sides) is installed. "Skids" or thick bottom runners, are sometimes specified to allow forklift trucks access for lifting.
Performance is strongly influenced by the specific design, type of wood, type of fasteners (nails, etc.), workmanship, etc.
Some boxes have handles, hand holes, or hand holds.