Improve ink colorability Several of the printing companies interviewed hoped that the ink production plant would improve the colorability of the ink, and hope to use quantitative ink to print more jobs or quantitative jobs with the least amount of ink to reduce printing costs. However, the amount of ink is closely related to the colorability of the ink. In the case of a certain amount of ink, the higher the colorability of the ink, the more jobs are printed and the greater the profit. Reduce the use of additives or use matching additives On the one hand, printing companies hope that the ink used can be used directly during printing, no or little additives are needed, and only the viscosity of the ink needs to be adjusted with a solvent. Because the addition of additives will increase printing costs, increase preparation time before printing, waste manpower, affect the stability of ink properties, and also cause trouble for post-press processing. On the other hand, the additives are required to have certain pertinence, the additives must be matched with the ink, the effect is obvious and easy to use. For example, Huangshan Xinli Ink Chemical Factory has formulated corresponding additives according to the characteristics of Huangshan Yongxin Joint Stock Company's printed products. Among them, additives B-0020 and B0142 can effectively solve the problem of knife stains in high-speed printing. Add additives B0142 It can improve the antistatic property of the ink without affecting the compound strength of the ink. For some printing plants, there is still a problem that the used ink needs to be stored for a short period of time. Now, many unused inks that have been added with additives can not continue to be used, causing waste. Therefore, the printing plant hopes that the used ink can continue to be used after simple treatment after storage for 1 to 2 months to reduce the waste of ink and save costs. This requires the ink manufacturer to solve the problem that the ink cannot be used continuously after being mixed. . Improve the adaptability of ink to high-speed printing At present, the speed of domestic gravure presses still needs to be improved, and the increase in the speed of printing presses will reduce the operating costs of printing plants and increase efficiency. Therefore, printing companies hope that plastic gravure inks that can adapt to higher printing speeds will be available soon.
Pet Waste Bag is a necessary product for
pets when they go out, especially dogs. Because dogs excrete outdoors, the
owner needs to deal with the dog's waste, and it is very necessary to have a strong
and easy-to-use garbage bag.
Outdoor Home Clean Garbage Bag are in the
form of roll cores, with sawtooth marks between each one, which can be easily
torn open without damaging the next bag.
There are other additional products
following the garbage bag.
If the owner has only one hand free, it is
too troublesome to turn out the garbage bag in the bag and tear it off for use.
So if you put the garbage bag in the Dog Poop Bag Dispenser, you only need to
pull it when you want to use it, which is very convenient.
When the owner collects the pet's waste,
there is no garbage can nearby to discard, so he needs to keep it in his hand
all the time. At this time, if you have a Poop Bag Clip, you can clip it on the
traction rope, and then you can hang the garbage bag under the clip, which is
very convenient and free your hands.
If the pet is still young, does not need to
excrete outdoors, and does not form the habit of going to the toilet at fixed
points and on a regular basis, it needs to use a Pet Dog Diaper Pads. Super
absorbent, non leaking urine pad will be a good choice for the owner.
Pet Waste Disposal Product,Dog Poop Bag Dispenser,Poop Bag Dispenser For Leash,Silicone Dog Poop Bag Carrier Mianyang Crossing Cross-Border E-Commerce Co., Ltd. , https://www.wycypet.com