One-leg lifting sliding table is a kind of work table that can be raised or lowered by electric or manual means. Lifting sliding table can be divided into the following types: Mobile Lifting Desk,Pneumatic Lifting Table,Pneumatic Air Lifting Table,Pneumatic Podium Table Suzhou Herstar Medical Technology Co., Ltd. , https://www.hosunherstar.com
After finishing printing or washing ink at the end of work, drain the water from the sink, close the water roller, and topped with water and other detergents on the water roller. After 1 to 2 minutes of operation, the water roller was watered through the water container so that the dirty thing was pushed out by the pressure of the water roller, and the dirty water dropped into the water tank. When the ink roller is basically washed, the ink roller is put down to make it come into contact with the plate surface, and at the same time, the purpose is to press the dirty water on the water roller through the plate to the ink roller, and bring it to the ink washing grid.
After about 10 minutes of operation, the dirty things on the water roller are washed, and the water roller color gradually becomes white. At this time, the contact between the ink roller and the plate surface must be released, and at the same time, the water roller must be separated to make the water roller itself. Run, but continue to water and drain dirty water thoroughly. If it is J2101 machine can be pulled down to open the sink nozzle, or use rubber hose to trap the lower end of the nozzle, drain the sewage in the sink. If it is a J2108 machine, use a small water scoop (half drink bottle is preferred) to remove the water from the tank. When the water roller is basically washed, stop adding water and allow it to idle for a few minutes. The 08 machine also needs to use a clean cloth to wipe the dirt that is adsorbed in the tank.
This washing roller has the following advantages:
A. The water roller is relatively clean, saves labor and time.
B. The washed water roll is flat, smooth, and free from lint.
C. Save the water roller, remove it, wash it, and put it on again.
D. The washed water roller is most suitable for printing. Because there is no plush, the printed ink is even and the texture is smooth. Good gloss.
The biggest disadvantage is that after washing the roller, the dirty water will splatter the body and the surrounding area. After parking, wipe it with a cloth.
1. Functional classification: lifting sliding table can be divided into single motor, double motor and three motor and other different types, with different lifting speed and bearing capacity.
2. Operation mode classification: the lifting sliding table can be divided into pneumatic and electric operation modes, and the moving operation can be realized by pushing buttons.
3. Classification of sliding way: lifting sliding table can be divided into two types with wheels and without wheels. The table with wheels can easily move the position, while the table without wheels is more stable.
4. Desktop material classification: The desktop of the lifting sliding table can be made of different materials, such as wood, metal, glass, plastic, etc., each material has its characteristics and application occasions customized.
Washing water method
Water roller is an indispensable part of the printing press. People often worry about washing the water roller. Here I introduce a simple washing roller method.