Dealing with a method of revising the plate remnants

<

Plates used for short-lived editions generally do not require baking. Dirty traces on the layout, once found on the machine, rub directly with a brush pen repair paste a few times, and then use the cloth to wipe the residual plate revision paste wipe, you can remove. Sometimes there are too many stains in the layout, and there are many places where the revised paste is rubbed. Be cautious when rubbing with a cloth. If you do not pay attention, you will scratch the text or graphics. Once the dry plate or cloth is greased, the place where the revised paste is rubbed and whitened will be obscured and it is difficult to clean it.

Here's a quick and easy way to deal with plate residual paste. This method can be used, but it should not be used continuously, so as to avoid excessive repair paste of water roller fleece and damage the image. Specific methods: After removing the stains with a brush pen repair paste, drive the machine, and then turn the water roller directly after the machine operates. Usually the first release of the water roller, this time due to residual plate revision paste, it is not appropriate to put down the water roller early, so as not to scratch the text. After the machine is running, the water roller is also turning. At this time, the water roller will not damage the graphic.


Source: Printing Talent Community

Hiking Backpack

hiking backpack

Mianyang Crossing Cross-Border E-Commerce Co., Ltd. , https://www.wycybag.com