14 Way Top Golf Stand Bag,American Golf Stand Bag,Bag Stand Golf Longzhao Technology (Guangdong) Company Limited , https://www.gdprincebag.com
Swing type imprinting mechanism The plastic gravure squeegee printing machine generally adopts a wobble type imprinting structure, and the printing pressure is 0-8kN (pressure is 0.7MPa). Imprinting is controlled by two cylinders, adjusting the pressure on both sides to meet the requirements of the squeegee printing. The installation and removal of the impression cylinder is very simple. The two holders on which the shaft end bearing of the impression cylinder is placed are semi-circular holes, and the impression cylinder can be removed by simply removing the press plate of the hole. The effective working length of the impression cylinder is generally equal to or smaller than the web width of the web of about 2 mm.
Gravure squeegee printing direct pressure imprinting mechanism
Gravure gravure printing squeegee machine adopts direct pressure imprinting structure, and the maximum printing pressure can reach tens of thousands of cows (at a pressure of 0.7Mpa). When the squeegee is needed for printing, the piston of the steam bar 5 moves down, pushing the back pressure roller 4 to press on the top of the impression roller 2 so as to move up and down, and the pressure with the plate cylinder 1 is completed. At this time, the tape passes through between the impression cylinder 2 and the plate cylinder 1 to complete printing.