[Abstract] The use of polystyrene foam and air cushion materials for the dishwasher packaging, and through the vibration and drop impact test test comparison, sum up the advantages and disadvantages, in order to choose a reasonable practical packaging materials and structures , And try to get a better buffer effect, to achieve product protection. Dishwasher is a small and medium-sized electromechanical product with a weight of 19kg and a thin shell. The fixed points on both sides of the plate are on the bottom, and there is no support for fixing points on the sides. There are ribs in the side plate, and there is no flexible pad between the rib and the side plate. According to the user's requirement of “not changing the size of the original outer packing box and not increasing the packing costâ€, the focus of the packing can only be on changing the structure of the original cushion or adopting new cushioning materials. 1. The original packaging problems and design solutions (2) Due to the lack of buffer area, the distribution is unreasonable, and the bearing area is too small. In particular, the weak links are not buffered, causing the following damages: the control panel and the box are disengaged, the fixed rubber strip comes off; the control panel is at the upper right The corners have serious cracks; the two sides of the board are slightly concave and convex. 1.2 Design Plan (1) Buffering and fixing of the weak link, between the control panel and the sliding door, due to the impact of vibration, making it produce a large vertical displacement, causing cracks with the hinge metal sheet shearing; the bottom of the buffer structure, the door and Add a rubber pad between the control panel to avoid the reaction force of the bottom surface. (2) In order to make up for the lack of floor area, increase the support area at the bottom of the rear end of the product, but highlight the two rear corners to prevent the force from being transmitted to the side plates. (3) Two designs a change the upper and lower buffer structure to the left and right buffer structure (Figure 3) b Use air cushion cushion
Deboning chicken is a time-consuming process and large meat processing plants deal with significant amounts of meat. Even if a plant employs a large number of workers to debone poultry manually, it will still be costlier and more time-consuming than utilizing deboning machines. Additionally, manual deboning has a negative effect on the freshness and quality of the meat. To solve these problems, Helper deboners provide excellent efficiency and output.
You can preprocess the poultry by cutting them into parts, and then efficiently debone separated meat by Helper deboner, which means customers only need to purchase the meat and segment it. Sunby deboners can quickly debone the meat and has less influence on the meat quality during the processing. Moreover, there are many models of deboners to meet your different demands.
QGJ-130 600-800kg/h
[Key words] air cushion foam cushion packaging
(1) According to the estimation of the original packaging cushion liner, the thickness of the polystyrene foam cushion can still meet the requirements, but the safety factor is too small and the buffer area is insufficient. In particular, the bottom surface, due to the lack of buffer area, causes local stress to be excessive when the impact is dropped, and its reaction force is transmitted to the two side walls of the product, resulting in deformation of the side wall.
Since the size of the outer box of the dishwasher has been determined, although the thickness of the foam pad is theoretically calculated as: = 39.1 mm, only a thickness of 30 mm can actually be taken. Because the original packaging cushion is in the form of upper and lower structures, the bottom area is insufficient to cause product damage. Therefore, the structure is buffered as shown in Figure 3.
This is a new packaging technology. For better performance comparison, the thickness of the air cushion is also set at 30mm. The air cushion adopts a block structure, and each face has 8 small units connected together, and the individual cells are independent of each other. The reason for this design is to prevent one of the monomers from being damaged and the other monomers continue to function.
(to be continued)
After processing, minced poultry can be made into chicken nuggets, sausages, etc.. The remaining crushed bone can be made into pet feed because it contains a lot of protein to that makes for high quality nutritional supplements.
QGJ-100 300-350kg/h
QGJ-160 1200-1500kg/h
QGJ-180 2000-3000kg/h
QGJ-220 3000-4000kg/h
QGJ-300 4000-5000kg/h
Meat Deboner,Bone Meat Separating Machine,Poultry Deboning Machine,Meat Bone Separator,Red Meat Deboning Machine
Helper Machinery Group Co., Ltd. , https://www.helperfoodtek.com