Cushions in various shapes, sizes, and designs, and they are often covered with fabric or leather. Foshan City Misirui Furniture Co., Limited , https://www.fsmisiruifurniture.com
2 Average output Continuously operating feeding quantity or finished product, intermittent operation feeding quantity or finished product, and adjustment scope thereof.
3 The condition of the finished product particle size, particle size distribution, particle density, bulk density, rehydration, etc.
4 Material inlet and outlet moisture content dry basis, wet basis.
5 Material properties Chemical, biochemical, microbial activity, heat-sensitive (melting point, glass transition temperature), moisture absorption isotherms (equilibrium moisture content), etc.
6 Drying time The influence of drying curve and operating parameters.
7 Heater type Contact method (direct, indirect).
8 Select steam, coal, electricity, oil, and gas.
9 Drying auxiliary equipment fans, dry scrubbers, wet scrubbers, feeders, feeders, finished product cooling and conveyors, etc.
10 Special requirements Constitute material, corrosive, toxic, non-hydrophilic, flammable and explosive limits, ignition points, color, texture, and fragrance requirements.
10 Drying System The footprint of drying equipment and ancillary equipment.
Dryer selection basics
1 Raw material in the form of particles, powders, particles, sludge, crystals, liquids, pastes, suspensions, solutions, continuous flakes, slabs, irregular materials (small or large), viscous or massive, etc.