With the development of technology and economy, people are now paying more and more attention to safety. However, how should we operate this equipment correctly in a laboratory using a constant temperature and humidity test chamber? The following small series gives you a few comments.

1. Before doing the test, please confirm whether the dry bulb over-temperature protection switch is set at the highest temperature of the equipment plus 10~20 °C. This is the scope of the security structure of the device.

2. The constant temperature and humidity test chamber is a non-explosion-proof product, so it cannot be used in the environment with flammable or explosive gas. Do not put flammable or explosive items into the box for testing.

3, the wiring must be correct, must be grounded. Failure to ground may result in electric shock, malfunction, abnormal display, or large errors in measurement. Also, in order to prevent electric shock or malfunction and malfunction, please do not turn on the power before installation and wiring are completed.

4. Constant temperature and humidity test chamber Please try not to open the door during the test. If it is opened at high temperature, it may cause burns to the operator. Opening at low temperature may cause frostbite to the staff and may cause the evaporator to freeze. Affecting the cooling effect, it is easy to cause equipment damage. If special circumstances must be opened, please do some protection work.

Reminder: In the use of constant temperature and humidity test chamber, you need to pay attention to personal safety and safety first. And when operating the equipment, you need to operate the equipment according to the instructions. If you encounter any problems, you can contact the original manufacturer to solve the problem.

Required course for correct operation of constant temperature and humidity test chamber