Shanghai Haozhuang Instrument Co., Ltd. develops the LNB brand carbon dioxide incubator, which is energy-saving and environmentally friendly, leading the country. Professional manufacturing is more secure and affordable Matters needing attention in the use of carbon dioxide incubator 1. Do not turn on the power switch before filling the carbon dioxide incubator, otherwise it will damage the heating element. 2. After several months of operation of the incubator, the water in the water tank may be reduced due to volatilization. When the low water level indicator (WLow12) is on, add water. First open the overflow pipe, use a funnel to connect the rubber pipe to add water from the water injection hole to make the low water level indicator go out, and then measure the additional water (CP-ST200A with 1800ml water, CP-ST100A with 1200ml water), and then block the overflow hole. 3. The carbon dioxide incubator can be used as a high-precision constant temperature incubator. At this time, the CO2 control system must be turned off. 4. Because the CO2 sensor is calibrated at saturated humidity, the humidification tray must always be equipped with sterilized water. 5. When the display temperature exceeds the set temperature by 1 ℃, the over-temperature alarm indicator (OverTemp7) lights up and a sharp alarm sounds. At this time, the power should be turned off for 30 minutes; if the power (temperature control) switch (Power20) is turned on again If it is over temperature, turn off the power and report to the maintenance personnel. 6. When the cylinder pressure is lower than 0.2MPa, the cylinder should be replaced. 7. Minimize the time to open the glass door. 8. If the carbon dioxide incubator is not used for a long time, the moisture in the working room must be cleared before closing, and the glass door should be opened for 24 hours and then closed. 9. When cleaning the studio of the carbon dioxide incubator, do not hit the sensor and the stirring motor wind wheel and other components. 10. When disassembling the bracket shield in the working room, a special wrench must be used, and no excessive force is allowed. 11. Before transporting the incubator, the water in the tank must be drained. When draining water, tightly fit the rubber tube on the water outlet so that the mouth of the tube is lower than the instrument. Gently suck a bit and put down the water tube, and the water will siphon out. 12. Before moving the carbon dioxide incubator, the shelf and humidification tray in the working room should be taken out to prevent collision and damage to the glass door. 13. When carrying the incubator, do not turn it upside down, and at the same time, do not lift the door of the box to avoid door deformation. Shanghai Haozhuang Instrument Co., Ltd. is a technologically innovative high-tech enterprise based in Shanghai and radiating the whole country. The company has first-class technical personnel and a good team of technicians, with advanced technology and strong development strength. Since the establishment of the company, the products and The service is recognized by customers and has a good reputation. The company adheres to the business philosophy of "integrity. Professionalism. Innovation. Growth" to provide customers with elaborate services. The company's main business and production scope include: testing equipment, laboratory equipment, cleaning equipment, Environmental protection equipment and undertake the design and customization of non-standard products and provide related technical services.
Anomatic Corporation, a fully integrated solutions provider for Metal Packaging, continues to expand its capabilities to serve the pharmaceutical and medical device industry producing Metered-dose inhaler (MDI) canisters, insulin pen components and Medical Devices.
Our attention to quality and customer service is at the core of our over 50-year success story allowing us to meet the critical demands of the Pharmaceutical, Medical Device, Military, Aerospace and Cosmetic sectors.
Anomatic has been providing high precision aluminum products since 1965, producing more than 1.1 billion parts annually. Anomatic is well equipped to design and develop customized Aerosol Cans manufactured to fit your specific pharmaceutical requirements.
Mdi Valves,Actuator Valve,Valved Holding Chamber For Mdi,High Quality Mdi Valves Anomatic(suzhou)metal packaging co,ltd , https://www.anomaticpharma.com
The humidifying plate of the carbon dioxide incubator must always be filled with sterilized water
Bringing new technology, innovation and cost-effective solutions to the pharmaceutical industry.