The difference between the gage reading of the vacuum oven and the reading of the thermometer of the glass rod in the vacuum chamber is that the normal electrothermal vacuum drying oven adopts the form of heating the wall surface of the vacuum chamber and then irradiating the surface with the workpiece. In this form, the temperature sensor of the temperature measuring gauge can arrange the vacuum open wall. The sensor is capable of withstanding the flow, propagation, and irradiance. However, the glass rod thermometer in the vacuum chamber can only withstand the radiant heat, and because the blackness of the glass rod is not enough to reach 1, the same irradiance heat is refraction, so the temperature value of the glass rod thermometer is determined. Below the gauge temperature reading. Normally, the temperature reading of the gage and the reading of the glass rod thermometer are not deformed within 30 °C when the temperature is 200 °C. If the temperature sensor of the temperature control gauge is arranged in the vacuum chamber, the difference between the temperature value of the glass rod thermometer and the temperature reading of the gauge can be appropriately reduced, but it cannot be eliminated, and the sealing reliability of the vacuum chamber is increased by one degree. Responsible links. If you do not expect to see a difference from the operational standpoint, you can adopt the special part of the temperature control gauge to show corrective performance processing.

Normal Nail Polish

There are 13 principal Nail Polish finishes: Shimmer, Micro-shimmer, Micro-glitter, Glitter, Lustre, Creme, Prismatic micro-glitter or shimmer, Iridescent, Opalescent, Matte, Duo-chrome, Jelly or translucent.