[ Chinese wardrobe net ] The fir board wardrobe not only has natural texture, but also has the clear fragrance of wood, and the cost is low, the processing is simple, so the price wins in the wardrobe market. At the same time, however, the wardrobe has a shortcoming of low strength, which is prone to cracking and deformation, and it takes time to maintain it in daily use. The fir board wardrobe is affordable and beautiful, especially need to pay attention to the deformation cracking problem. 1. Introduction of wooden wardrobe of fir board For the Chinese fir board, there is another name called finger joint board, which is made up of a piece of wood similar to the size of a finger. When splicing, there is a lot of glue used in every place. 2, the advantages of wooden wardrobe of fir board Due to the soft texture, easy processing and low cost of the fir board, the wooden wardrobe of the fir board is cheap on the market, and has the unique fragrance of the fir board, which is more natural and beautiful. 3, the wooden wardrobe of fir boards Also, because the Chinese fir board is soft in texture, its strength is low, it is easy to crack and deform after use; and if the surface is not polished, the surface is very rough and it is easy to break the clothes; in addition, since the production method requires a large amount of glue, the whole is glued. The smell is not environmentally friendly, and it is easy to cause indoor environmental pollution. At the same time, it is easy to cause insects and is not easy to take care of. The fir board wardrobe is affordable and beautiful, especially need to pay attention to the deformation cracking problem. 4. Cleaning and maintenance of fir furniture requires attention to the following two points: 1. The wood of fir is not tight, the material is soft, and it is easy to deform and crack. If the processing is not good, it is prone to a different degree of deformation. Keep the fir furniture dry and clean, avoid flooding, rain, moisture, and if there is any stain on the surface of the fir furniture, you can wipe it with a cotton swab. Do not use wet mop, alkaline water, soapy water and other corrosive liquids and gasoline. Wipe with olefinic materials and high temperature liquids. If you accidentally pour water or leave water on fir furniture, you must wipe it with a dry soft cloth in time. After cleaning, you can not directly expose the sun to the sun or bake it in an electric oven to avoid drying too fast and the fir furniture is cracked. 2. Maintain proper indoor temperature. Fir can not collide, in the high temperature environment, it is easy to dry, it is easy to be tarnished, and sometimes it is easier to deform. Fir furniture should try to support the sun and strong storms, so as to avoid excessive drying and aging of the paint by ultraviolet radiation. In general, the maintenance of fir furniture should not be exposed to sunlight to avoid fading. Lightly put, avoid heavy pressure, avoid sharp damage. Custom hardware part, Custom metal hardware, China Metal hardware Shenzhen Hongjingyuan Metal&Plastic Products Co., Ltd. , https://www.hjypull.com