[Meeting Bao Hardware Machine Grid Guide] There are many ways to hang curtains. Different suspension methods will make curtains have different effects. The installation of the curtain rod directly affects the effect of the curtain. What is the installation method of the IKEA curtain rod? How is the IKEA curtain rod installed?

There is a wonderful suspension solution behind every wonderful curtain solution. Curtains are important items for decorating the indoor environment. If the curtains are installed well, it will directly affect the interior decoration effect of the home. There are many ways to hang curtains, and different suspension methods will make the curtains have different effects. The installation of the curtain rod directly affects the effect of the curtain. What is the installation method of the IKEA curtain rod? How is the IKEA curtain rod installed?

The curtain rods should be prepared for the installation of the curtain rods prior to installation. First of all, the materials for the installation of the curtain rods should be prepared, mainly including wood and products, hardware accessories, metal curtain rods or curtain rods of other materials. The main materials used in the installation of IKEA curtain rods are hand drills, small electric tables, saw blades, small planes, trough planes, small wood saws, screwdrivers, chisels, punches, hacksaws, etc. The materials to be used in IKEA curtain rods need to be determined at the time of purchase to avoid delays in installation due to the lack of accessories during the installation process.

1. Marking: Use the mounted bracket as the standard scribe line to draw the bearing positioning line and the hole position line. The three supports, the middle support is located in the center of the window or wall, and the ends must be equidistant. The supports at the ends are about 15-20 cm away from the wall, or 5-10 cm from the end of the Roman rod.

2. Punch: The depth of punching is 3.5 - 5cm. When punching, you can't run the eye or skew. Note: Keep away from wires and water pipes. After punching, press the plastic expansion tube into the hole.

3. Installation: the rod support is fastened with self-tapping; the lifting ring is inserted into the rod, the lifting ring is divided into two, and one ring is left at each end; the Roman rod is pressed into the opening support, and the two ends are decorated. The distance from the head to the wall is the same.

4. Hanging curtains: Put the hooks on the curtains, and hang the other end of the hooks into the holes of the rings; open and close the curtains to check whether the sliding is flexible and whether the two curtains are equal.

Editor in charge: Wu Mengyu