[ Chinese wardrobe net ] wardrobe is an essential piece of furniture for every family. Without it, our clothes can only be piled up together, not only will it not damage the upper body effect of the clothes. So we have to install the wardrobe when we are at home. Let's take a look at it with Xiaobian. 1, wardrobe size installed wardrobe We should determine the size of the wardrobe before installing the wardrobe. In fact, according to the type of clothing you want to place, the length of the wardrobe is different. China's standard for wardrobe size is very detailed. The depth of the closet should be between 550mm and 600mm, and the depth of the sliding door should be 626mm. The distance from the lower edge of the clothes rail to the bottom should be at least More than 900mm, if it is a long coat, it should be greater than 1350mm. In addition, the width of the image stacking area should be between 330 and 400 mm and the height should be greater than 350 mm. Xiaobian here to remind everyone, in addition to the size of the interior of the wardrobe, the overall size of the wardrobe should also match the entire room, should not be too large. 2, the installation steps of the cabinet installation (1) Prepare all kinds of tools: Generally speaking, only a Phillips screwdriver is required for the installation of the cabinet. (2) clarify the various components of the wardrobe that will be assembled: this step allows us to no longer be in a hurry in the subsequent installations, so the panels, back panels, side panels, floors, top shifts, partitions, The base combination panel and some small pieces of hardware should be clearly counted and placed in the appropriate position for easy access. (3) Screw the screw into the base plate so that the bottom plate is tightly connected to the base. (4) Screw the screw into the corresponding hole of the side plate and the back plate. (5) Connect the side panels and the back panel to each other, and connect the partitions to each other. Everyone must pay attention to the direction. (6) Connect the cabinet to the base, and then connect the base to the bottom of the wardrobe. This is the final step in the installation of the cabinet. 3, the precautions for the installation of the cabinet (1) In addition to paying attention to the appearance of the wardrobe, we must pay attention to safety and practicality. For example, many wardrobes now use beautiful glass sliding doors. You must pay attention to the fact that the sliding doors are not too high, otherwise it is easy to cause accidents during installation. (2) When installing the wardrobe, in order to prevent the parts of the wardrobe from being damaged during installation, you can actually lay a layer of felt on the floor to prevent smashing. The items related to the installation of the cabinets are introduced here. The cabinet installation looks simple, but the construction is a bit complicated. Swing Turnstile Gate characteristics Mechanical Swing Turnstile Gate,Full Automatic Swing Barrier Gate,Rfid Swing Turnstile Gate,Swing Baffle Gate Guangdong Zecheng Intelligent Technology Co., Ltd , https://www.zechengsecuritys.com
1. Practicability: The swing barrier gate adopts non-contact IC or ID card, which successfully solves the problems of one card with multiple functions, confidentiality, no wear, and easy operation, which greatly improves the practical application.
2. Convenient expansion: The computer and the mechanical swing turnstile gate use 485 bus communication, so the expansion is convenient.
3. It can be used offline: the full automatic swing barrier gate can not only be used in conjunction with a computer network, but also can be used offline.
4. Reset function: After the personnel pass through the channel, the swing baffle gate will reset by delay or infrared induction.
5. Convenient counting: The RFID swing turnstile gate can be displayed on an external screen to facilitate the management of the flow of people.