The first is in the laboratory environment, the need to choose a good installation site, which is the prerequisite for the correct use of the air system for the compressor of the high and low temperature series test equipment. If the test environment of the test equipment has no prior planning, it is not known that the result of such a sloppy result is the reason for the difficulty in repairing the compressor failure and the poor quality of the compressed air in the future. 1. Since the compressor has an air circulation system, if there is much dust in the environment around the equipment, a filtering device is needed. At the same time, it is absolutely not allowed to contain flammable gas and corrosive gas in the air, so as to avoid explosion or internal corrosion. Overall, the Heyi instrument believes that the relative humidity of the air is low, the ash is often small, and the ventilation is good. 2. The performance of compression should not be affected by high temperature, and the ambient temperature is lower than 30 °C. If the temperature is too high, the output air volume of the compressor will decrease. 3. The equipment should be placed in a spacious place. The narrow space is not conducive to the later maintenance and maintenance. In particular, the radiator (condenser) of the compressor's freezer should be regularly maintained and kept clean. 4. The voltage at the working space of the test box should be stable, otherwise the current will be too large or too small. Working under these conditions will cause damage to the compressor. 5. The test box should be built on a hard floor. The foundation plane should be leveled before installation to avoid noise caused by vibration of the compressor. Temporary fence netting,Temporary Fence,Welded Mesh Temporary Fence,Welded Mesh Panel Temporary Fence Hebei Giant Metal Technology Co., Ltd. , https://www.hebeigiantmetal.com