When the decoration of our house is done, the bathroom will be waterproof. Because the bathroom is the place with the most water consumption, it must be waterproof. However, it is more troublesome to waterproof the bathroom, so we need to pay attention to it. There will be more, then how to make waterproof in the bathroom? What are the precautions for waterproofing the bathroom? If you want to know, let's take a look at the small series of the decoration home network.

First, how to make waterproof bathroom

1. We should pay attention to the overall situation of the bathroom water and electricity before the construction, and then in the targeted design and construction. In the base treatment, the ground is flattened with cement slurry, and then the waterproof treatment is started. The thickness of the waterproof layer of the bathroom should be above 1.5mm, and a 24-hour water-shielding test should be done after completion. In the following week, a protective layer of cement mortar should be applied to the waterproof coating layer to protect both the waterproof coating and the tiling.

2. Before the waterproofing, observe the water circuit of the bathroom and modify it according to the actual situation, and have a detailed understanding of the concealed project. After determining the plan, the water and electricity heating pipes will be laid flat. Secondly, the original decorative materials are cleaned, and then several surfaces are flattened with cement slurry, and then waterproofed.

3. In order to prevent the subsequent construction from damaging the waterproof layer, it is necessary to lay a protective layer on the surface of the waterproof coating. The protective layer should completely cover the waterproof layer, and there is no leakage. It is firmly bonded to the base layer, free from cracks, no bubbles, and no falling off.

Second, the bathroom waterproof points

1. The choice of materials for the bathroom waterproofing project is crucial. Because only the selection of excellent quality materials, there will be no phenomenon of wall material falling off. When the wall surface appears to fall off, it will not be waterproof. Therefore, the owners must conduct a waterproof test before they can carry out other projects.

2. In the general bathroom waterproofing treatment, the wall surface should also be made of waterproof coating of about 30 cm high to prevent the water from oozing through the wall. However, if the wall of the bathroom is a non-load-bearing light-weight wall, the entire wall should be covered with waterproof coating.

3. The seam should be painted in place. The seam between the bathroom wall and the joint between the upper and lower water pipes and the ground is the most prone to problems. All waterproof coatings must be applied "in place" during construction.

4. When the bathroom is bathed, it will splash water to the adjacent wall. If there is no protection of the waterproof layer, the partition wall and the opposite corner wall are easy to be mildewed and mildewed. So be sure to shop before the wall tiles, good waterproof wall, waterproof treated in general do 30 cm high wall surface waterproofing treatment to prevent bleeding water through the wall. However, for non-load-bearing light-weight walls, it is necessary to waterproof the entire wall, at least 1.8 meters high.

There are places that are waterproof. Not only the top of the house is waterproof, but also the bathroom. What are the main points of the bathroom such as waterproofing and waterproofing? Through the introduction of the above small series, everyone knows about these. Well, if you still want to know more about decoration, please continue to pay attention to the decoration home Internet cafe.

More related wonderful reading:

How to make waterproof bathroom? Bathroom waterproofing precautions

Dog Harnesses

COMFORTABLE SPONGE FILLED ANTI PULL

No stress on dog's neck, no choke, ideal solution for dogs that pull with sponge filling comfortable and luxurious, perfectly designed for easy walking, jogging, running, hiking or even training.

No Pull, No Choke - perfect for dog training or dogs who tend to pull. The back one is great for casual walks, jogging, hiking, etc.

Easy to Use - This hassle-free overhead harness is easy to put on and take off with its fast-release buckles. Slide the harness over your dog's head, buckle it up, adjust the straps, and here you go! Grab the top handle for additional control. Lightweight and easy to clean.

Safe and Comfortable - Your dog will enjoy the daily walk in this comfort dog harness! Made of durable nylon oxford and padded with soft cushion to protect your dog's skin.

We are a Chinese pet products manufacturer, our company produces and sells various cat accessories and dog accessories, including Pet Toys , Pet Apparel And Accessories, Pet Collar And Leashes , Pet Beds And Accessories, Pet Cleaning And Grooming Products, Pet Bowls And Feeders , Pet Houses , and Pet Carriers And Travel Products, which are accepted OEM&ODM. Please don`t hesitate to contact me if you need anything.

Dog Harnesses,Dog Seat Belt,Puppia Harness,Tactical Dog Harness

Jilin LOYO Pet Products Co.,Ltd. , https://www.jilinloyopets.com