The periscope can be used to measure the internal tooth of the I-piece. From the figure, it can be seen that a periscope is installed between the lens and the scan head Conoprobe. After the laser beam is refracted by the periscope, the optical path is changed to collect the internal teeth of the workpiece. data.
The user can collect the internal thread data in the cap without having to destroy the cap and configure a periscope with the Conoprobe scan head.
System Components:
Conoprobe scan head non-contact laser scan head, weight 700g, speed 3000 dots/second
75mm lens weight 25g, measuring accuracy is less than 10 microns, repeated positioning accuracy of 2 microns.
The periscope can collect inner wall data and can be customized according to customer needs. The smallest aperture that can be detected is 7mm.

method:
With a 0.01mm step along the Z-axis, the data on one vertical section can be acquired for every 90° of rotation of the rotary table. Take the four section lines and the system can automatically analyze the following measurement data: pitch, thread depth, tooth profile R angle .
The software is easy to operate and has a user-friendly interface. The user simply presses a start key and the system will automatically detect and analyze and issue a detailed report. It takes only 40 seconds to detect a bottle cap!

Pond And Garden

Led Light For Pond,Pond Water Pump,Pond Garden Led Light,Pond Filter

Shenzhen GAKO Aquatics Products Co., Ltd , https://www.gako-aquarium.com