MICROS water sample collector (water collector)-MICROS Water Sampler

The MICROS water sample collector is recognized by the world and is not very complicated.
The water intake depth is 100 meters. The shape of the sampler is very slender, so that the diameter of the sample is very thin,
Reached 80mm.
Another feature of the MICROS water sample collector is that it can be sterilized in an autoclave,
Make sure that the sample does not contaminate the bacteria.

The MICROS water sample collector consists of a stainless steel body, a Teflon material sample bottle holder (with a silicone sample tube on it) and a replaceable glass sample bottle with a capacity of 500ml.

To prevent the sample from being contaminated by surface water, MICROS will be in a closed state (silicone tube is clamped)
The water sample collector is attached to a cable and sinks into the water. When the desired depth is reached, a hammer will hit the anvil, and the silicone tube will bounce, allowing water to enter the sample vial and expel air.

When studying samples, remove the sample vial from the holder so that the sample vials will not interfere with each other because of the dumped sample.

Micros water sample collector ordering guide:
436 160 MICROS water sample collector, suitable for water depth of 100m
Comes with a 500ml sampling bottle and a plastic coated hammer

436 165 Glass collection bottle with a volume of 500ml and a water depth of 100m

440 002 plastic-coated hammer with 6mm aperture and 500g mass