Coupling Belt Conveyor Turning Device Working Principle Conveyor turning device adopts long-satellite roller steering roller which can cut off the disk to ensure that the conveyor can eliminate axial force during the plane rotation and achieve the purpose of tape reversal. The belt turning device can realize any conversion angle from 0° to 180°.

The use of belt bending device:

The belt conveyor turning device has a wide range of applications. The belt machine turning device can make the belt conveyor realize horizontal turning, turning up and down, turning in combination, and changing up and down the slope (the pressure belt function can be realized in the up and down slope operation to prevent production ribbon). Belt turning device Consider using a commutation system when the following conditions occur.

1. In a transportation system, it is most suitable to use commutation when multiple conveyor belt conveyors must be used to transport or large laps must be laid for lap-to-door transportation due to the bends in the transport lanes.

The system can implement labor saving, power saving, equipment saving and power saving control.

2.Because the reversing system can use a head and a storage belt device and a tensioning device before and after turning the belt conveyor, the distance from the tail of the belt conveyor to the turning point can be very short (the shortest can only have 4 Meters

Therefore, in the end, there is no trouble in requiring that the belt conveyor is too short for a shop to be replaced, which will greatly increase work efficiency.

3. When digging the roadway, using the reversing system to extend the belt conveyor to the excavating head can replace the trouble caused by the laying of the slide. This can save labor and electricity, and it can also save

Belt machine cornering device performance parameters and scope of use

Turning device use range and parameter selection

Steering angle: 0° to 180° can be achieved

Bandwidth: 500mm to 1 400mm

Model: All Belt Conveyors

Turns: 1~2 times

Resistance coefficient: K=1.08~1.1 2

The main features of the belt conveyor turning device:

Save investment: Save equipment investment such as head, tail, slide, and electric control.

Reducing personnel: No need for special personnel, reducing the number of jobs and increasing the safety factor.

Energy savings: The device does not require power, reducing installed capacity and saving a lot of power.

Reduced costs: The device is simple in structure, saving time, power, and labor and greatly reducing operating costs.

Maintenance is simple: it is very convenient to check the replacement of small satellites regularly.

Easy installation: no need to increase the height and length of the roadway