Technical measures to improve the quality of pipeline construction in residential kitchens. The indoor cross-branch should be concealed or concealed as much as possible to ensure the cleanliness and beauty of the interior. The household pipe of tap water and hot water should be DN20, and the specification of the household gas meter should be no less than 4 cubic meters. The water meter should be installed in a position that is easy to see and does not hinder the interior beauty. One or two spare tees shall be added to the tap water pipes in the kitchen for users to take over when using water appliances (such as electric water heaters, gas water heaters, dishwashers, etc.). The hot water pipe should be connected to the sink in the kitchen. To fundamentally solve the problem of drainage pipe leakage and water leakage, the horizontal pipe should be buried in the ground floor and not extended to the lower floor. The specific method is as follows: the elevation of the cast-in-place floor of the kitchen is lowered by 140-180 mm. Connect the washing basin to the horizontal pipe laid on the cast-in-place floor (this pipe is DN75). After the pipe is installed, the ground will be treated to ensure that the ground slope is 20 mm below the floor and other rooms. Measures to strengthen kitchen technology. In a small kitchen, in order to make full use of the wall to install the facilities, the exterior wall can also have only a glass door leading to the balcony, and the door has an openable window. Generally, attention should be paid to using the dominant wind direction to wear the wind to improve the ventilation level. Mechanical ventilation can also be used to enhance ventilation. From a practical point of view, even if a powerful range hood is used, there will be spillage of the fumes remaining outside the ceiling, such as secondary ventilation with a ceiling fan hidden in the ceiling, which has a better effect. In the design, attention should be paid to the air inlet, and the louver air intake can be provided in the lower part of the door leaf leading to the outside. According to the requirements of the regulation, vertical cold air ducts should be set up in the cold and cold areas. At present, the main and auxiliary air ducts are used, and the residential kitchens use the direct exhaust type hood to discharge better.
The Glass Water Bottle is designed for those who are picky of the plastic or metal smell. For those people, they do not like plastic or metal bottles, but need to have a transparent materials. The glass Water Bottle is made of tempered glass. It is processed under 800 degree, so it is green and safe, no smell. In order to protect the hands from the hot or cold liquid, we will use a silicon cover on the bottles. The only drawback is that the glass bottle could be damaged falling onto the ground.
Glass Water Bottle Glass Water Bottle,Tempered Glass Water Bottle,Glass Sports Water Bottle,Glass Drinking Bottle Zhejiang Haoqi Industry And Trade Co.,Ltd. , https://www.anaturekitchen.com