The xenon lamp aging box simulates sunlight in daily life through the use of xenon lamps. Together with the invisible moisture that exists around us, it combines both to simulate an accelerated aging process of the sun and the rain. It is very important because basically every product has to be destroyed by light and moisture. The purpose is to reproduce the destructiveness of light in the environment. The specific uses are mainly in the following three aspects.

1. The xenon lamp aging box improves the environmental simulation acceleration test for product development and quality control. To put it plainly, it is to test the quality of the product.
2. The xenon lamp aging box can be used as a new material or improve the durability of the material. We have to evaluate its durability in many material studies so that it can be compared with the previous ones. ()
3. The xenon lamp aging box simulates very different common everyday environments and changes in the materials produced in these environments. This means that by placing the sample inside, you can predict its aging damage process and get some necessary data to evaluate the product.

Xenon lamp aging test chamber technical specifications: ()                 

Machine size:               

1. Studio size: 90 x 95 x 90 CM (W x H x D)

2. Machine full size: 165 x 200 x 155 CM (W x H x D)

Temperature and humidity range:

1. Temperature : RT ~ 85 °C                  

2. Wetness: 30% to 98% RH

Machine accuracy:

1. Temperature fluctuation: ≤±0.5 °C                 

2. Temperature uniformity: ≤±2 °C (without illumination)

Light source type:              

Imported water-cooled full solar spectrum long arc xenon lamp (average life of 1600 hours)

Rainfall time: 1～9999 minutes, adjustable

Rainfall period: 1 to 240 minutes, interval (break) adjustable

Spectral wavelength: 290nm～800nm

Xenon lamp power 1KW, 6KW (lifetime: 1600 hours)

Light source wavelength range: 290-800nm

Light source irradiance: 550-1200w/m2

Irradiated area: about 7500cm2

The distance from the arc center to the sample rack: 350 to 380mm

Sample rotation basket speed: 1 ~ 3r/min (stepless speed regulation)

Spray period:

Spray time: 0～99h59min, continuously adjustable; spray pressure: 78～127KPA

Stoppage time: 0～99h59min, continuously adjustable

Illumination time: continuous programming control

Blackboard temperature: 40 °C to 65 °C (±3 °C )

Refrigeration mode: The main technical parameters of the mechanical cooling air-cooled products above are measured at room temperature below 26 °C , relative humidity ≤ 85% RH, and under the no-load condition of the studio, the temperature and humidity are constant after two hours.

With the development of various industries, the requirements for materials have become more stringent, and the application range of xenon lamp aging boxes has become more and more extensive. Before use, we should fully use the xenon lamp aging tester. The above three points are several important uses of the xenon lamp aging tester.

Xenon lamp aging box, weather resistant test box, ultraviolet light aging test box, aging box, solar test box, Xenon lamp aging test box