The pressure-sensitive transfer label is suitable for metal, plastic, synthetic materials and other hard materials such as air conditioners, refrigerators, washing machines, water heater housings, fishing rods, clubs, bicycles and other sports equipment surface decoration.

The production of printed patterns is the printing of design patterns, photographs, textual information, etc. onto substrates, making it a completely independent product for distribution, such as labels. There are many ways to print labels. This article mainly introduces labels for transfer printing, that is, the use of physical and chemical methods to transfer printing patterns and colors onto substrates. There are many applications and methods of printing products and conventional printing. the difference.

Wiping the transfer label

1. Features and uses: Suitable for hard and smooth materials such as paper, wood, plastic, etc., used in graphic design, photo albums, and toy stickers. Scratch, transfer paper, etc.

2. How to use: Open the surface of the label release paper, align the pattern with the position to be transferred, and wipe it evenly with the nail or wood on the back of the pressure-sensitive film. Tear the packaging machine'target=_blank>transparent film. You can complete the graphic transfer.

Reverse pressure transfer label

1. Features and Applications: Reverse pressure-sensitive transfer labels are classified into three types: solvent-resistant, scratch-resistant, and baking-resistant. Solvent-based pressure-sensitive transfer labeling, solvent-resistant scrubbing after transfer, scratch-resistant, grind-type pressure-transfer labeling, which can be applied without any treatment after transfer, can have good adhesion and scratch resistance, but should avoid hard objects. Scraping; High-temperature baking-type pressure-sensitive transfer label can be glazing after transfer, or it can be directly baked without glazing oil. The pressure-sensitive transfer label is suitable for metal, plastic, synthetic materials and other hard materials such as air conditioners, refrigerators, washing machines, water heater housings, fishing rods, clubs, bicycles and other sports equipment surface decoration.

2. How to use: Simply peel the protective film, align it with the transferred position, and evenly press it to tear the bottom paper to complete the pattern transfer.

Reverse water transfer label (B, C transfer label)

1. Features and uses: The so-called B, C transfer mark, that is, the reverse transfer pattern needs to use B, C transfer liquid to complete the transfer, can be applied to bicycle frame, car shell, fishing rod, wood. Metal and other smooth surfaces.

2. How to use: Immerse the water transfer paper in the liquid B and C for about 6 seconds. After removing it, stick it on the printed surface. Use a rubber strip to evenly wipe the back of the paper. When wet, the backing paper can be torn off and the pattern is transferred to the substrate. Wipe off the water left by the surface pattern of the substrate with a clean, damp cloth, and then apply the varnish and baking treatment after drying it. Because its surface is anti-adhesive, it is generally applied to products with a more regular surface.

Soluble positive transfer water transfer label

1.Characteristics and use: The so-called soluble positive transfer water transfer label, that is, the water transfer paper used for film formation and bridging, can be compatible with transparent varnish in the post-treatment process, leaving no trace and can be used for helmets. , bicycles, automobiles, various rackets, clubs, toys, musical instruments, small furniture, and other materials.

2. How to use: Cut the label pattern and immerse it in warm water of 25-40°C for 30-60 seconds. Take out the transfer paper and stick it on the surface of the substrate. Use a pattern to slide on the surface. It has been separated from the backing paper. After the surface of the object is cleaned with water, the moisture under the layer is evenly wiped with a rubber strip, so that the pattern is flatly attached to the surface of the material, and finally the moisture is wiped with a clean cloth, and the transfer of the pattern is completed.

Due to the certain toughness of the graphic film layer, when the moisture under the layer is scraped, the pattern should be adhered to the irregular surface while wiping the water, which is also the biggest advantage of the water transfer method. After fully drying, the transfer graphic can be sprayed with varnish and baked. Must be fully dry, otherwise there will be bubbles after baking, causing the waste label. The characteristics of the water transfer label are beautifully printed, colorful, suitable for a wide range of materials, and the label is firm, beautiful, and not easy to change color, especially for irregular surfaces.

Strippable positive transfer water transfer label

1. Features and Uses: Strippable positive transfer water transfer mark that is, in the transfer process, the water transfer film that functions as a film and bridging can be torn off, and the ink layer of the pattern is attached to the material after transfer. At the same time, the effect of direct screen printing cannot be achieved. Widely used in ceramic, glass material crafts, gifts, bicycle racks, motorcycle baffles, packaging containers, helmets and other irregular surface decoration.

2. How to use: Cut the label and immerse it in warm water of 25-40°C for 30--60 seconds. Take out the transfer paper and paste it on the surface of the substrate. After the pattern slides on the surface of the paper, it is separated from the attached paper. , Clean the surface of the object to be attached, press and hold the pattern to pull out the bottom paper, and adhere the pattern to the surface of the substrate; use a rubber strip to evenly wipe off the moisture under the layer, so that the pattern is flat on the surface of the substrate, and then use a clean cloth. Dry the water and the pattern transfer is complete. After drying for at least 1 hour after the transfer, for plastics, wood and other products, after the film is peeled off, apply light oil. Baking at 800°C for 10 minutes or baking at 180-200°C for 15-20 minutes can achieve good results. This method is suitable for glass, ceramic products, also known as glass, ceramic low temperature water transfer label.

Reprinted from: Printer