Ink matching is a problem that is often encountered in the printing process. The so-called color matching is to use two or more colors, or in addition to the main color, and then use a small amount of colors adjacent to form a color combination. Color matching can make a single color evolve into thousands of brilliant colors. Here's a brief introduction to some of the issues that should be noted when matching colors: 1 Use primary colors as much as possible to avoid using color separations for color matching. 2 Use the least variety of colors for deployment. The less the color, the better the mixing effect and the better the saturation of the color. 3 Use the "from shallow to deep" approach to color matching. Care should be taken when the hue is close to the pattern. 4 try to choose the same manufacturer or the same series of ink, otherwise it will produce a phenomenon of uneven color, in severe cases will produce agglomeration and make the ink scrapped. 5 One color that needs to be deployed is best adjusted at a time. Avoid dividing into several colors, otherwise it is easy to have a different hue. 6 Under stable natural light, avoid color matching in direct sunlight. 7 The color matching should be tested in the same process as the formal production. For example, during the printing process, heating is required, and the heated hue will produce a certain change. Therefore, the color must be heated and compared and adjusted. 8 It is necessary to select a stable quality ink, and to use colorants with good resistance to permeation, otherwise color migration will occur easily. The color migration is affected by intermediate media such as printed substrates and materials. Different migration properties are also different. Use before testing according to requirements. 9 When debugging red or light blue, the stability of the pigment mixture in the ink is poor. After the printing process or printing on the product, the ink may change color and affect the uniformity of the color, so the mixture should be used with caution.
Nail grooming is an important part of women's beauty. Women who love beauty always paint their long nails with bright red nail polish. To show the charm of delicate hands. But before you beautify your nails, you should touch them up. The first is to remove the old nail polish. Dip a cotton cloth in nail polish remover and rub vigorously from the bottom of the nail to the tip several times to remove thoroughly. This can also allow the old nail polish to soak into the skin or surrounding tissues. Then use a manicure tool to trim the shape of your nails. When finished, dip your hands in soapy water to loosen the skin. Then carefully wipe your fingers and fingers with a towel, and slowly press your fingers so that your skin is close to your nails. If necessary, use cuticle clippers and tweezers to remove the insides and uneven dead skin at the root of the nail.
Base your nails before painting them. In addition to using oil or cream around the nails and at the base, apply a protective layer to the nails. Shake the nail polish before painting to make the color inside the bottle even.
Reprinted from: Hezhong Export
Nail Gel,Acrylic Nail Art,best gel nail polish,gel polish design
DONGGUAN VOLES COMMODITY CO., LTD , https://www.volescommodity.com