The structure of the centrifugal fine filter is complicated, with high-speed moving parts inside, and the maintenance technical requirements are high. Therefore, pay special attention to the following points during maintenance: 3. Essentials for assembly (1) Assemble after correct assembly marks (2) Ensure the tightness of the filter during assembly (3) Perform performance inspection after installation i-Size,child car seat,Convertible seat,ECE R129 car seat NINGBO BABY FIRST BABY PRODUCTS CO.,LTD. , https://www.nbbabyfirst.com
1. Thoroughly clean the parts. Clean the oil sludge on the inner wall of the filter with oil, and then wipe it with a clean cloth or blow it with compressed air. Scrape the sediment on the rotor body wall with a wooden knife first, then wash the rotor body and the outside with cleaning oil, then wipe it with a clean cloth or blow it with compressed air. The nozzle tube of the rotor body is dredged with copper wire, washed with oil, and then blown through with compressed air. After washing the filter on the nozzle tube with oil, blow it with compressed air. Note: When cleaning, do not clean the gasket.
2. Familiar with the structure, the normal disassembly must first clarify the assembly relationship between the structure, parts and components and assembly marks. During the disassembly process, certain parts are checked to determine whether they can continue to be used.