Storage Ottoman,Ottoman Coffee Table,Step Stool,Counter Stools CAMOSA HOME , https://www.camosa-funiture.com
2 according to the specific situation
In the process of printing, overlapping unevenness occurs, that is, the printing is normal for a while, and white or black bars appear for a while. 1 The conduction band is not tight. 2 The cloth is too large and too heavy. The weight is too heavy. Or the cloth separation point is too high 1 Tighten the guide tape 2 Should take certain auxiliary measures 3 Adjust it
Frequently Asked Questions in the Operation of Inkjet Printers
Common problems Causes Prevention and treatment methods When the fabric is deflected into the cloth during the printing process, the fabric is left unattended. When the fabric is placed on the tape, note the left and right positions. A white bar or pattern may appear when printing occurs. The nozzle is blocked. A white bar or black bar, or an imaginary edge 1 The nozzle is blocked or obliquely sprayed. 2 Stepping is not allowed. 1 Clean the nozzle. 2 Adjust the forward control of the tape. White or black bars appear on the print. Left and right unequal width guides appear. The unevenness of the left and right tension, or the driving roller and the tension roller do not adjust the conduction band and the tension roller in parallel so that the tension does not advance during the printing. 1 The control power supply in the electrical control box is out of order 2 The data on the AC servo drive Loose wire 1 Check the power supply 2 Check the connection of the data cable When printing a straight line pattern, a jagged pattern occurs. When the fabric is tentered, the width is too wide. After the dye solution is sprayed on the fabric, it shrinks to produce zigzag. The conductivity of the conductive tape is insufficient. Slippage with the conduction band 1 Control fabric stretch rate <2%