Excellent quality dots, lines, and solid ground; the background and blank lines are clean; the overprint is accurate, and there is no bottom. Insufficient or unsuitable gray ink on the pattern; too much moisture, the pressure between the water roller and the plate is not correct, and the pressure between the plate and the rubber or the rubber and the pressure roller is insufficient There are too many blots, insufficient water, the water roller is not clean, the water roller is tied too tightly at both ends, and may be oxidized. The pattern is off-white, the background is stained with ink dots or the rubber is shiny, and the pressure of the water roller or ink roller is too large. The gloss generally remains varnish or water in the cleaning process. Printing paper curls too much moisture, the paper itself curls. The front edge of the paper is not clamped properly or the feed roller adjustment is incorrect The pre-printing rule on the bite edge is too high, and it is not adjusted near the feeding table; this situation usually occurs when printing on the cover. Because the thickness of the paper is different, lower the front rule. There is too much wrinkle moisture, the paper is damp, the feeding table is not adjusted, and the pressure between the rubber and the impression cylinder is too large. Off-line (because there is a drug film on the surface of the plate) The front side rule is not allowed for overprinting, and the teeth are not adjusted when swinging; the edges of the paper are not at right angles, and the blanket is loose. Ink roller printing depends on the plate. The pressure of the ink roller is too high, the pressure between the plate and the rubber or the rubber and the impression cylinder is too large, the rubber cloth is loose, and the ink is not suitable. There is no insufficient pattern pressure, too much moisture; the ink roller and blanket are shiny. The pattern is too dark, too much ink, too much pressure, the ink is stored on the plate and blanket. Double shadow, fuzzy version and rubber blanket are loose, too much water and ink; pressure between the version, rubber and impression cylinder is inaccurate, and the clamp of the conveying cylinder is inaccurate. Uneven distribution of ink Uneven distribution of ink; uneven pressure between water roller and ink roller; uneven pressure between rubber and impression cylinder; uneven ink roller, poor paper; dry ink on impression cylinder; Clean the water roller ink roller again. The pattern has weak mesh rubber with concave holes, the plate is eroded, the pressure between the plate, the rubber and the impression cylinder is insufficient, and the ink is too viscous to stick to the paper. Potion: thinner, Blanker restorer
Kamadolink has many accessories which are made of ceramic, you can find here such as Chicken Sitter, Pizza stone, Heat Deflector and so on.
There are different sizes of accessories to suit for the different sizes of Kamado Grills.
It can be nice and delicious to cook a chicken with the Chicken Sitter on the Kamado Grill, also the Pizza stone.
If you like, no hesitate to contact us.
Kamado Ceramic Accessories,Kitchen Kamado Ceramic Accessories,Ceramic Kamado Accessories Bbq Grill,Black Kamado Ceramic Accessories Yixing Linchang Technology Co., Ltd. , https://www.kamado-link.com
The pressure of the water roller or ink roller is too high; or the two sides are strongly rolled, and the pressure between the plate and the rubber roller is too large.