With the rapid development of the printing industry and packaging industry, hot stamping has become an indispensable new process in the printing and packaging industry. The bronzing process consists of traditional bronzing and special bronzing. Special hot stamping is different from traditional hot stamping 1. In the hot stamping process, there is no need to make a metal relief, the cost is low, and the speed is fast, as long as there is a negative film. 2. Suitable for the production of small batch and multi-variety personalized hot stamping products. 3. Low hot stamping temperature, 100 to 130 degrees. 4. Suitable for hot stamping of large area and fine lines. 5. Hot stamping substrates are not limited, such as: various plastic films, paper, leather, metal, glass, etc. 6. Good adhesion to hot stamping substrates. After curing, the photosensitive film has the characteristics of high brightness, no yellowing and no scratches. Specific hot stamping process Printing or spray printing photosensitive hot stamping ink → drying → film exposure → hot stamping → finished product. 1. Use 200 mesh to 300 mesh screen full version to brush the photosensitive ink or spray the substrate to be hot stamped evenly with a spray gun. Liquid photosensitive ink is a kind of transparent varnish, specially used for various hot stamping. It has excellent light-sensitivity and a high graphics resolution with a minimum line width of 0.05 mm. 2. Dry. Use electric wind to dry or use screen drying oven, pay attention to the temperature is about 40 degrees. 3. Film exposure. Design and make the necessary hot stamping graphics with a computer, output the negative film for UV exposure. After exposure to ultraviolet light, the photosensitive film in the non-patterned portion becomes thermoset, and the patterned portion is still thermoplastic. 4. Hot stamping. In the hot stamping process, the adhesive layer of the gold and silver hot stamping foil is bonded to the thermoplastic part of the photosensitive film due to hot fusion, and does not adhere to the thermosetting part, thereby achieving thermal transfer of the hot stamping film. Hot stamping equipment can be used for hot stamping with plastic sealing machine, electric iron and heat press machine. The temperature can be controlled at 100 to 130 degrees. 5. Hot stamping finished products. After hot stamping, gently tear off the excess hot stamping film into a dazzling finished product.
1.High performance outside court surfaces
Incorporating new advanced technology to insure a safe and comfortable playing. 5.5 mm thicker shock-absorbing surface reduces playing fatigue and provides better ball rebound with exceptional game performance
2.Dimensional stability
Design with thicker fiber glass mesh layer and High density foam layer, no shrink, no movements, no buckles
3.Special formula material offers high weather resistance
Resistance to ultraviolet radiation, hot temperature, acid corrosion, and ensure color lasting
4.Easy installation, Low-maintenance, and Cost-effctive
PVC Sports Floor,Outdoor Sports Floor,Outdoor PVC Sports Floor Shijiazhuang Enlio Sports Goods Co., Ltd. , https://www.enliosports.com