AED and CPR training simulator

<

AED and CPR training simulator

This training system is suitable for BLS (BasLifeSupport) training for teachers and students in higher medical colleges, nursing colleges, occupational health colleges, and hospitals. Through training operations, students are familiar with the first aid procedures and procedures of BLS, and master the use of AED (Automated External Defibrillator). The system includes AED99D automatic external defibrillator (for training only) and half-body CPR (CardiopulmonaryResuscitation, cardiopulmonary resuscitation) training simulator combination.

Features of AED99D:
1. The design conforms to ergonomics. When the cover is opened, the device is turned on; when the cover is closed, the device is turned off.
2. Simulate the work flow of BLS at the emergency site. The AED99D automatic external defibrillator (for training) has no high-voltage electric shock defibrillation action. The whole Chinese voice prompts guide students to familiarize themselves with the BLS work flow and AED use points.
3. Automatically detect whether the placement position of the defibrillation electrode pads is correct, and students can become familiar with the placement position of the electrode pads by repeatedly using the simulated AED.
4. There are 9 built-in scripts, which can simulate the first-aid scene in different scenarios, and the whole voice prompt guides the trainer to complete the BLS training. You can pause or continue the BLS process as needed.
5. Fault simulation function, select the voice prompts that can be used to simulate the situation through the remote control, including: other people touch the patient's body during the defibrillation process, the patch position is incorrect, the patch position is correct, no defibrillation is required, defibrillation is required, and the machine malfunction ,battery is low.
6. Power management function. The system automatically detects the battery power. When the battery power is low, the system will have a voice prompt "Battery power is low, please replace". During two AEDs, the system is in standby state and enters the power saving mode. After booting, if there is no operation within 3 minutes, the system will automatically enter the standby state.

Functional characteristics of half-length CPR training simulator:
1. Simulate standard airway opening.
2. Artificial chest compression.
3. The pressing intensity is correct (4-5cm area), there is a correct buzzer prompt.
4. If the pressing intensity is too large (5cm <area), there will be a warning sound.
· Artificial mouth-to-mouth breathing (blowing)
5. The amount of tidal volume blown in is judged by observing the fluctuation of the chest: (Tidal volume standard ≤500 / 600ml-1000≤)
· Operating frequency: the latest international standard: 100 times / min · Operating method: training operation
AED INSTRUMENT AND CPR TRAINING MANIKIN

This manikin is suitable for BLS (Basic Life support) and AED (Automated External Defibrillator) training.
Features of AED99D:
1. Opening or closing the cover will turn on AED instrument.
2. Simulate first-aid procedure; AED99D (only for training use) has not high
tension shock motion.
3. Automatically check the position of electrode pad.
4. There are 9 internal scripts, simulating different conditions.
5. Simulate: touch the patient´s body when conducting AED; the position of
electrode pad is wrong or right; it is need to defibrillate or not; machine has
trouble; the electricity is low.
6. Electricity management function: The system automatically checks the
batteries electricity. When the electricity is low, there will be sound indicating.
Between twice AED, system will enter saving power mode. If there isn´t
operation in 3 minutes, system will enter waiting mode.

Features of half-body CPR manikin:
1. Simulate airway opening
2. External breast compression: sound prompting
3. Artificial respiration: observe the fluctuation of chest (Inhalation standard: between 500 / 600ml-1000ml)
4. Operation frequency: 100 times per minute (the latest international standard)
5. Operation mode: exercise mode


Tension Fabric Displays :


Our Tension Fabric Display is 240g and 280g stretch fabric with dye sublimation printing plus strong aluminum frame. It is very easy to assemble and store. LED lights on the top of the display stand is available. We have different shape of our tension fabric displays ,such as curved fabric tension displays , straight fabric tension display ,pop up tension fabric displays , oval tension fabric counter ,tension fabric hanging banners. Custom size and shape is acceptable.


Suitable for exhibitions, events, conferences, showrooms and retail. The most important is that the cost is very economical , you just need to buy the aluminum frame one time , and easy to change the graphic banner for your next trade show ,events .ect. Double sides printing is available .So this means you can use the banner twice. and show the different graphic on double sides on the same time .


tension fabric diplays

FAQ:

1. what is the difference between graphic only, or graphic included option?

--- Graphic only is for old customer to replace graphic printed banner .Graphic included means printed banner add aluminum frame.

2. do you provide design service ?

--- Yes ,we have template for desig.

Tension Fabric Display

Tension Fabric Displays,Fabric Pop Up Display,Pop Up Display,Fabric Display

Golden Mouth Advertising (H.K)Co.,Ltd. ( Jie Da Advertisement Co.,Ltd) , https://www.advertisingflagbanners.com