In the board slide, the name of the board movement on the platform is from the skateboard. These scratchboards and pieces not only add points to the style, they also have the effect of helping the skater to complete the air movement. The gripper helps the skater maintain stability in the air, while the body can help control the rotation. Correctly mastering and using these movements will definitely help your slippery progression. Front gripper: Nose After take-off, with the aid of the rebound of the board, the front foot brings the back foot to pull the board closer to the body. During the landing, the front legs still pulled the board to the side of the body and the hind legs kicked forward. Press the end of the board and the back hand stretches back so that the front board can easily catch the board. After the hand to catch the tail: Tail Before the hand between the two feet before the edge: Mute After the hand between the two feet before the edge: Indy The knee is slightly curved and the upper body is leaning forward. The backhand then grasps the front edge portion between the two legs via the hind leg side. Beforehand grasp the back edge between the two feet: Melon After the hand grabs the back blade between the feet: Stalefish After the low center of gravity slides up, the knee bends, and the board pulls the board closer to the body with the help of the board's repulsive force. The back hand grasps the back edge between the board fixtures between the two legs, and the front hand lifts up naturally. Rear gripper plate: Crail Two-handed grasp between the two feet of the front blade: Mindy/Gorilla Two-handed gripper: Rocket Air Hold the board with both hands and keep the board near the waist. The former hand crossed the legs and grabbed the front blade: Taipan The former hand passes through both legs and grabs the back blade: Chicken Salad There are other variants of handsome grippers: Method, Japan, Cross hand Gorilla, Truck Driver, Holy-Crail The front hand grasps the posterior edge between the fixtures via the back of the body. The completion of this action requires a high take-off height and a long air time. So you need to find a suitable landslide. After the jump, the knees are bent and the heel is used to pull the veneer to the hips. The back hand swings in the direction of the front shoulder, and the upper body rotates forward to the right shoulder. The front hand grasps the back edge between the front foot and the back foot through the outside of the front foot. Finally release the hand, lower the center of gravity, and land. If the gripper's hand can pull the board up to the height of the buttocks, it would be a nearly perfect Method. The forehand grasped the forward part of the forefoot through the outside of the forefoot and bent his knee. At the same time, the back hand is raised backwards. The same action still needs to maintain a good balance of body. In this way, your stability in the air can be good. Gravity centered on the front leg when gripping the board, which is also conducive to landing. The backhand passes around the front to grab the blade, and the front hand grabs the board behind him.
The material of the report clip is generally PP, the cover is transparent PP, plus the pole.Because the cover is transparent, it is very convenient for reports, plans, statements, resumes and reading, protecting documents from damage.Report clip can be divided into pull mouth clip, report clip, pull rod clip, hanging catch clip, etc.It is also a good tool for sorting files
Report Covers,Clear Report Cover,Plastic Report Covers,Custom Report Covers shaoxing chaofeng stationery manufacturing CO.,LTD. , https://www.chaofengstationery.com
