Solid wood furniture is now the choice of many people, especially in recent years, such as mahogany, eucalyptus, oak, etc., not only no harm, but also natural texture, individual wood scent and reminder function, is currently choosing home improvement, office, outdoor furniture The mainstream, then the problem is coming. Since the solid wood furniture is so good, it is inevitable to buy fake and inferior solid wood furniture when buying. Let’s talk about it in detail today: 1. Check the surface: Place your hand on the surface of the furniture and carefully check whether the polished surface is smooth. In particular, avoid the roughness of the table legs, whether the paint is streaked, whether the pigment in the corner is too thick, and whether there are cracks or bubbles. 2. Observe the strength of the board: The surface of the board can be pressed with a finger to feel the fastness of the board. One side of the material should have a well-shaped skeleton to fix. If the skeleton is sparse, the surface will feel empty and false, and the panel will vibrate greatly; the bottom of the drawer should be pressed by hand to test the strength, and the bottom of the partition is usually multi-layered with a large area. The partition should be made of five-layer board. Cabinet doors and drawer switches should be flexible. When the panel is covered with thin wood and other materials, the color of the product should be similar, and the paint film on the surface of the product is not allowed to wrinkle, stick and leak paint. 3. Determine whether the furniture is really made of solid wood: 4. Observe the wood for defects: 5. Observe the pros and cons of wood: Open the furniture cabinet door and drawers and observe whether the wood is dry and white, and the texture is tight and delicate. If you have furniture made of materials such as particle board, MDF and one-time forming board, open the door or drawer and smell it for a pungent smell. 6. Determine what kind of tree is made of solid wood: This is a direct impact on price and quality. Ordinary solid wood furniture usually uses eucalyptus, white oak, ash, eucalyptus, eucalyptus, rubber wood, eucalyptus, while the valuable mahogany furniture mainly uses rosewood, wenge, rosewood. The market for solid wood furniture is rather chaotic, and there are often things that are shoddy and confusing trees. It is best to buy brand-name products. At the same time, it should be noted that the price of wood is rising day by day, and it is absolutely cheap to be too cheap. 7. Check stability and safety: Observe the presence or absence of the drawer or the door frame tilting phenomenon, whether there is a skew of the eye caused by the twisted eye position or the eye hole is too large, and the hoe is not strict. Wooden furniture should have safety and stability. When the two doors are opened 90 degrees, the hand can be gently pulled forward, the cabinet can not be tilted forward automatically; the glass of the bookcase door should be edging; the mirror and The dressing table should be equipped with a back panel, and the bead should be fixed to the glass surface. Individual parts of the furniture (such as legs, drawers, doors or brackets) must be supported. You should push the top corner of the furniture or sit on one side and try to make sure the furniture is firm. 8. Turn the furniture upside down: Turn the chair upside down on the furniture and look at how they are made. As for the table, check from the bottom. See if the seams are reinforced with screws and wedges? Is the slats tightly fastened to the crosspieces? There are no excess glue or filler in the seams. 9. Check the slides and latches of the drawer: The drawer should be solid and secure with the screws tightened inside. It is a good idea to open the drawers, the event table, the doors and other parts to ensure that they can be used freely and properly connected. 10. Check the interface: It is advisable to purchase a dovetail joint or a butterfly joint. Heavier furniture should be screwed with a protective block at the corner and glued. As for the back plate part, it is also necessary to check whether it is set and the screws are attached. Usually remember this "top ten attention" to buy solid wood furniture, buy solid wood furniture for your company, home, you don't have to worry about it! Peripheral Devices and Consumables
Based on the low labor cost and reasonable stainless steel cost, Helper help to offer clients internal transport devices with best price. These machines and device include standard material truck, smoking trolley, lifter, conveyer belts, spiral feeding machine, hydraulic lifter etc. The internal transport device is used in filling and forming workshop, tumbling and seasoning workshop, smoking and cooking room etc.
Helper has a professional team to design and produce sausage clips. They have rich experience and understand all the key points for produce good quality clips. From the raw material purchasing to mould designing, from the QC in production to post-treatment, they pay attention to all these details that lead to the good quality of Helper`s clip series. Our clips products include U shape clips, Great wall shape clips, and aluminum wire (for aluminum wire clipper).
U Shape Sausage Clip,Clips On Strip,Bag Packaging Clips,Screw Material Conveyor Helper Machinery Group Co., Ltd. , https://www.helperfoodmachiney.com
A mystery to determine whether solid wood furniture is: wood grain and knots. For example, if a cabinet door looks like a pattern, then the corresponding pattern of the pattern changes, and the corresponding pattern is seen on the back of the cabinet door. If the correspondence is good, it is a pure solid wood cabinet door. Also look at the knot is also a good way to identify pure wood: optimistic about the location of the scar side, and then find the corresponding pattern on the other side.
The main stress-bearing parts of the furniture, such as the column and the load-bearing horizontal strip connecting the column to the ground, should not have large knots or cracks or cracks. The structure is firm, the frame must not be loose, and it is not allowed to break or break the material. The components of the wood-based panels used in the furniture shall be edge-sealed, and the various accessories shall be installed with few pieces, missing nails and nails. 
